5m Everedge Classic Lawn Edging - H7.5cm

£34.99

F[105388]HI_Everedge_Classic_Lawn_Edging.jpg F[91729]10_Installation.jpg F[90514]15_Everedge_Classic_Lawn_Edging.jpg F[90512]20_Everedge_Classic_Lawn_Edging.jpg F[90524]30_Everedge_Lawn_Edging_Before_And_After.jpg F[90783]40_Everedge_Classic_Lawn_Edging.jpg F[91671]50_Everedge_Classic_Lawn_Edging.jpg F[92141]60_Everedge_Classic_Lawn_Edging.jpg F[91869]70_Everedge_Classic_Lawn_Edging.jpg

Select Colour:

Add to Basket

Black

10+ In stock
Add to Basket

Brown

10+ In stock
Add to Basket

Dark Green

10+ In stock
Add to Basket

Galvanised

10+ In stock
Add to Basket

Slate

10+ In stock

Details

Keep your lawn, driveway, pathways, flower or vegetable beds neatly edged with this Classic Lawn Edging.

Manufactured from galvanised steel with a heavy plastic coating, this edging will not rust and is guaranteed for 10-15 years.

Containing five x 1 metre long pieces with six spikes per piece to give you plenty of options as to where you feel it will enhance your garden best. It can be overlapped or cut but you are advised to touch up the ends with hammerite.Being made of steel, the edging is strong yet also thin enough to easily bend into shape.

Available in a brown or slate finish, this looks great straight or curved in any style of garden, ranging from sleek town gardens to quaint country gardens.

Dimensions: 1m x 7.5cm high
Height of spikes: 9.5cm
Quantity: 5 pieces

Please note that although each piece is 1 metre in length the length is slightly reduced when the pieces overlap to lock.

This Classic Lawn Edging is available in brown or slate colour, please choose below;

 

How To Install Your Everedge Lawn Edging

  • Step 1: Form a new edge or re-cut the existing edge deeper - effectively make a trench for the Everedge.
    Step 2: Place Everedge in position; moving the spikes from side to side in the soils helps to seat it well.Ensure the Everedge logo is facing the front and that the new piece being installed has the male section locking into the female.
    Step 3: Using a rubber mallet or hammer on a block of wood, drive the Everedge into the ground until the edge is flush with the turf level.
    Step 4: Interlock the overlap
    Step 5: When all your edging is installed, press in the tongue using a screwdriver. Only push to about 45 degrees
    Step 6: Using either another piece of Everedge edging, or a length of timber, Everedge can be bent to the required angle before installing.

Please see extra images for a larger version of the step-by-step images.

Customer note: All the different heights of Everedge Lawn Edging are compatible. The join is always the same height from the top edge so the tops of all sizes will remain flush when put together

Please click here for more ideas from our Lawn Edging Department.

Login to Post Review

Reviews

I think this item is great for the job by Kev on 29 November 2018

Was very pleased with the delivery no damage when arrived and was the perfect item for the job it was used for very happy with this purchase

A great propduct by Eric Cudworth on 28 November 2018

Having tried other methods, I have found Everedge to be easily the best. Fitting two pieces together is not quite as easy as it sounds; it would be easier if the slot for the locking tab were a bit wider. I found it best to fasten three pieces together before placing the fist of them in the prepared ground. When the job is done,the lawn mower glides over the edges easily so that eventually they are completely hidden by the grass. I'm hoping the edge will last for years.

Does what it says. by tracyellen on 20 November 2018

Great product. Looks good quality. Easy to use but might be difficult to cut. We didn't need to so unable to comment on that. Used it to edge a circular lawn

I now have an excellent lawn edging by Hazel on 31 October 2018

I had a new round lawn created. It could be difficult to maintain as a perfect circle, but installing Everedge edging should keep the exact shape. It was quite easy to install;the only thing that took time was removing stones that prevented the edging from being dug in. I was lucky that 9 pieces of edging fitted round the circumference almost perfectly, so I didn't have to worry about cutting a piece. I am very pleased with the finished effect.

Pleasantly surprised by JPJ on 22 October 2018

My wife had wanted to do something for the edging for a while and I had put it off due to it being something I’d never experienced. Well the edging went in far easier than I could have expected and the resulting edges are making the garden a pristine treat.

Good value by David T Monk on 19 October 2018

I found the 5 sections used for a new border fitted together with ease and could be readily fixed into a curved shape without too much effort into a heavy clay based soil.

Location

This and similar products can be found in: Lawn Edging